Hydrostatic pressure testing machine Those things

The hydrostatic pressure testing machine runs successfully. The equipment adopts the frequency conversion control technology to automatically test the pressure in stages. The system is equipped with a two-pump working system, which can perform two-way tests separately, independent of each other and without affecting each other. The equipment is developed by LabVIEW software. The test phase and the pressure holding time can be set by software to realize one-button operation. With overpressure automatic pressure relief, alarm, automatic stop operation or manual stop operation: When the equipment pressure exceeds the test pressure 0.2MPa, the system automatically stops the water pumping and pressurizes the pressure, and starts the pressure relief. When the automatic stop fails, it can be manually manual. Stop by an emergency stop;

Product range: shell and tube evaporator, horizontal condenser, volume range: 0.4-6.5 cubic

The equipment has setting parameters, and automatically pressurizes and maintains pressure according to the pressure-time parameter (boost, pressure, and pressure drop are automatically controlled according to the curve requirements, and the stopping point and holding time can be set by themselves);

1, hydrostatic pressure testing machine force requirements to meet 0-3MPa;

2. The water volume is adjustable between 0-6.5 m3;

3. The equipment can be boosted in stages, and the boosting and holding time can meet the requirements of the following figure (boost and pressure relief without manual operation, and the dwell time can be adjusted);

4. The equipment requirements have a multi-station function, and it is required to at least meet the independent pressure test of the two shells;

5. The equipment has a medium (tap water) recycling function;

6, with pressure test data record storage function;

7, with a print pressure test curve diagram function.